Do you need an advice?
Wire to Wire Splicing CWT
CWT terminators offers performance up to +125ºC, utilising cross linked, heat-shrinkable polyolefin insulation.
Product variants
Name / part number | temperature min. [°C] | temperature max. [°C] | AWG | Add |
---|---|---|---|---|
CWT-3807-W5 | -55 | 125 | 26 |
CWT-3807-W5
Add
pc(s)
|
CWT-3809 | -55 | 125 | 0 |
CWT-3809
Add
pc(s)
|
CWT-3809-W1 | -55 | 125 | 22 |
CWT-3809-W1
Add
pc(s)
|
CWT-3809-W2 | -55 | 125 | 22 |
CWT-3809-W2
Add
pc(s)
|
CWT-3809-W3 | -55 | 125 | 0 |
CWT-3809-W3
Add
pc(s)
|
CWT-3809-W4 | -55 | 125 | 26 |
CWT-3809-W4
Add
pc(s)
|
CWT-3809-W5 | -55 | 125 | 26 |
CWT-3809-W5
Add
pc(s)
|
CWT-3811 | -55 | 125 | 0 |
CWT-3811
Add
pc(s)
|
CWT-3811-W2 | -55 | 125 | 22 |
CWT-3811-W2
Add
pc(s)
|
CWT-3813 | -55 | 125 | 0 |
CWT-3813
Add
pc(s)
|
CWT-3813-W2 | -55 | 125 | 22 |
CWT-3813-W2
Add
pc(s)
|
CWT-5 | -55 | 125 | 0 |
CWT-5
Add
pc(s)
|
CWT-5-1000 | -55 | 125 | 0 |
CWT-5-1000
Add
pc(s)
|
CWT-5-S | -55 | 125 | 0 |
CWT-5-S
Add
pc(s)
|
CWT-5-W122-5 | -55 | 125 | 22 |
CWT-5-W122-5
Add
pc(s)
|
CWT-5-W122-9 | -55 | 125 | 22 |
CWT-5-W122-9
Add
pc(s)
|
CWT-6 | -55 | 125 | 0 |
CWT-6
Add
pc(s)
|
CWT-6-W122-5 | -55 | 125 | 22 |
CWT-6-W122-5
Add
pc(s)
|
CWT-6-W122-9 | -55 | 125 | 22 |
CWT-6-W122-9
Add
pc(s)
|
CWT-1501 | -55 | 125 | 0 |
CWT-1501
Add
pc(s)
|
CWT-1501-T1 | -55 | 125 | 0 |
CWT-1501-T1
Add
pc(s)
|
CWT-1501-T2 | -55 | 125 | 0 |
CWT-1501-T2
Add
pc(s)
|
CWT-1501-T3 | -55 | 125 | 0 |
CWT-1501-T3
Add
pc(s)
|
CWT-1501-T4 | -55 | 125 | 0 |
CWT-1501-T4
Add
pc(s)
|
CWT-1502 | -55 | 125 | 0 |
CWT-1502
Add
pc(s)
|
CWT-1502-T4 | -55 | 125 | 0 |
CWT-1502-T4
Add
pc(s)
|
CWT-1503 | -55 | 125 | 24 |
CWT-1503
Add
pc(s)
|
CWT-1504 | -55 | 125 | 0 |
CWT-1504
Add
pc(s)
|
CWT-4058-W122-5/9 | -55 | 125 | 0 |
CWT-4058-W122-5/9
Add
pc(s)
|
CWT-4059-W122-5/9 | -55 | 125 | 0 |
CWT-4059-W122-5/9
Add
pc(s)
|
More products from the category: Wire to Wire Splicing
SGRT
SolderGrip terminals and disconnects utilise a spiral copper coil that grips and compresses the conductors and allows a pre-fluxed solder ring to flow to the centre of the splicing area, resulting in a highly reliable, repeatable joint.
B-202
SolderShield cable splices meet the growing performance requirements for shielded cable system fabrication and maintenance while minimising electromagnetic interference (EMI). Being one piece products consisting of a flux coated, solder impregnated copper hield braid encased in a heat shrinkable insulation sleeve, with crimp wire connectors. Conductor splices are made using MiniSeal crimp products which are recognised by MILS-81824 and MIL-W-5088.
B-070
These Feed-thru devices are designed to provide a high reliability water-resistant connection for a shielded or coaxial cable passing through a bulkhead or into equipment, when used with Thermofit boot and adhesive
1 pc/m