Do you need an advice?
Wire to Wire Splicing D-150
SolderShield cable splices meet the growing performance requirements for shielded cable system fabrication and maintenance while minimising electromagnetic interference (EMI). Being one piece products consisting of a flux coated, solder impregnated copper hield braid encased in a heat shrinkable insulation sleeve, with crimp wire connectors. Conductor splices are made using MiniSeal crimp products which are recognised by MILS-81824 and MIL-W-5088.
Product variants
Name / part number | temperature min. [°C] | temperature max. [°C] | AWG | Add |
---|---|---|---|---|
D-150-0094 | -55 | 150 | 30 |
D-150-0094
Add
pc(s)
|
D-150-0095 | -55 | 150 | 30 |
D-150-0095
Add
pc(s)
|
D-150-0096 | -55 | 150 | 26 |
D-150-0096
Add
pc(s)
|
D-150-0168 | -55 | 150 | 26 |
D-150-0168
Add
pc(s)
|
D-150-0169 | -55 | 150 | 20 |
D-150-0169
Add
pc(s)
|
D-150-0170 | -55 | 150 | 16 |
D-150-0170
Add
pc(s)
|
D-150-0174 | -55 | 150 | 26 |
D-150-0174
Add
pc(s)
|
D-150-0175 | -55 | 150 | 18 |
D-150-0175
Add
pc(s)
|
D-150-0176 | -55 | 150 | 14 |
D-150-0176
Add
pc(s)
|
D-150-0177 | -55 | 150 | 12 |
D-150-0177
Add
pc(s)
|
D-150-0178 | -55 | 150 | 26 |
D-150-0178
Add
pc(s)
|
D-150-0179 | -55 | 150 | 22 |
D-150-0179
Add
pc(s)
|
D-150-0180 | -55 | 150 | 18 |
D-150-0180
Add
pc(s)
|
D-150-0181 | -55 | 150 | 18 |
D-150-0181
Add
pc(s)
|
D-150-0214 | -55 | 150 | 16 |
D-150-0214
Add
pc(s)
|
D-150-0228 | -55 | 150 | 26 |
D-150-0228
Add
pc(s)
|
D-150-0229 | -55 | 150 | 20 |
D-150-0229
Add
pc(s)
|
D-150-0230 | -55 | 150 | 16 |
D-150-0230
Add
pc(s)
|
D-150-0231 | -55 | 150 | 26 |
D-150-0231
Add
pc(s)
|
D-150-0232 | -55 | 150 | 18 |
D-150-0232
Add
pc(s)
|
D-150-0233 | -55 | 150 | 14 |
D-150-0233
Add
pc(s)
|
D-150-0234 | -55 | 150 | 12 |
D-150-0234
Add
pc(s)
|
D-150-0235 | -55 | 150 | 26 |
D-150-0235
Add
pc(s)
|
D-150-0236 | -55 | 150 | 22 |
D-150-0236
Add
pc(s)
|
D-150-0237 | -55 | 150 | 18 |
D-150-0237
Add
pc(s)
|
D-150-0238 | -55 | 150 | 14 |
D-150-0238
Add
pc(s)
|
More products from the category: Wire to Wire Splicing
SGRT
SolderGrip terminals and disconnects utilise a spiral copper coil that grips and compresses the conductors and allows a pre-fluxed solder ring to flow to the centre of the splicing area, resulting in a highly reliable, repeatable joint.
B-202
SolderShield cable splices meet the growing performance requirements for shielded cable system fabrication and maintenance while minimising electromagnetic interference (EMI). Being one piece products consisting of a flux coated, solder impregnated copper hield braid encased in a heat shrinkable insulation sleeve, with crimp wire connectors. Conductor splices are made using MiniSeal crimp products which are recognised by MILS-81824 and MIL-W-5088.
B-070
These Feed-thru devices are designed to provide a high reliability water-resistant connection for a shielded or coaxial cable passing through a bulkhead or into equipment, when used with Thermofit boot and adhesive
1 pc/m