Do you need an advice?
Wire to Wire Splicing SGRT
SolderGrip terminals and disconnects utilise a spiral copper coil that grips and compresses the conductors and allows a pre-fluxed solder ring to flow to the centre of the splicing area, resulting in a highly reliable, repeatable joint.
Product variants
Name / part number | temperature min. [°C] | temperature max. [°C] | AWG | Add |
---|---|---|---|---|
SGRT-1-02 | -55 | 150 | 21 |
SGRT-1-02
Add
pc(s)
|
SGRT-2-03 | -55 | 150 | 16 |
SGRT-2-03
Add
pc(s)
|
SGRT-2-04 | -55 | 150 | 16 |
SGRT-2-04
Add
pc(s)
|
SGRT-2-05 | -55 | 150 | 16 |
SGRT-2-05
Add
pc(s)
|
SGRT-2-06 | -55 | 150 | 16 |
SGRT-2-06
Add
pc(s)
|
SGRT-3-06 | -55 | 150 | 13 |
SGRT-3-06
Add
pc(s)
|
SGRT-3-08 | -55 | 150 | 13 |
SGRT-3-08
Add
pc(s)
|
SGRT-4-06 | -55 | 150 | 10 |
SGRT-4-06
Add
pc(s)
|
SGRT-4-08 | -55 | 150 | 10 |
SGRT-4-08
Add
pc(s)
|
More products from the category: Wire to Wire Splicing
SGRS
Closed-end connector utilising a spiral copper coil that grips and compresses the conductors, allows pre-fluxed solder ring to flow to the centre of splicing area, resulting in a highreliability, repeatable joint.
B-202
SolderShield cable splices meet the growing performance requirements for shielded cable system fabrication and maintenance while minimising electromagnetic interference (EMI). Being one piece products consisting of a flux coated, solder impregnated copper hield braid encased in a heat shrinkable insulation sleeve, with crimp wire connectors. Conductor splices are made using MiniSeal crimp products which are recognised by MILS-81824 and MIL-W-5088.
B-070
These Feed-thru devices are designed to provide a high reliability water-resistant connection for a shielded or coaxial cable passing through a bulkhead or into equipment, when used with Thermofit boot and adhesive
1 pc/m