Do you need an advice?
Wire to Wire Splicing D-436
Small, lightweight and low-profile MiniSeal high performance crimp splices, substantially reduce wire bundle size & weight, QPL listed to the MIL-S-81824 specification.
Product variants
Name / part number | temperature min. [°C] | temperature max. [°C] | AWG | Add |
---|---|---|---|---|
D-436-0110 | -55 | 155 | 26 |
D-436-0110
Add
pc(s)
|
D-436-0115 | -55 | 155 | 26 |
D-436-0115
Add
pc(s)
|
D-436-0119 | -55 | 155 | 26 |
D-436-0119
Add
pc(s)
|
D-436-0128 | -55 | 155 | 26 |
D-436-0128
Add
pc(s)
|
D-436-36 | -55 | 155 | 26 |
D-436-36
Add
pc(s)
|
D-436-37 | -55 | 155 | 20 |
D-436-37
Add
pc(s)
|
D-436-38 | -55 | 155 | 16 |
D-436-38
Add
pc(s)
|
D-436-42 | -55 | 155 | 24 |
D-436-42
Add
pc(s)
|
D-436-43 | -55 | 155 | 26 |
D-436-43
Add
pc(s)
|
D-436-52 | -55 | 155 | 16 |
D-436-52
Add
pc(s)
|
D-436-53 | -55 | 155 | 18 |
D-436-53
Add
pc(s)
|
D-436-58 | -55 | 155 | 20 |
D-436-58
Add
pc(s)
|
D-436-59 | -55 | 155 | 18 |
D-436-59
Add
pc(s)
|
D-436-60 | -55 | 155 | 20 |
D-436-60
Add
pc(s)
|
D-436-61 | -55 | 155 | 16 |
D-436-61
Add
pc(s)
|
D-436-75 | -55 | 155 | 20 |
D-436-75
Add
pc(s)
|
D-436-76 | -55 | 155 | 16 |
D-436-76
Add
pc(s)
|
D-436-77 | -55 | 155 | 21 |
D-436-77
Add
pc(s)
|
D-436-78 | -55 | 155 | 17 |
D-436-78
Add
pc(s)
|
D-436-82 | -55 | 155 | 26 |
D-436-82
Add
pc(s)
|
D-436-83 | -55 | 155 | 26 |
D-436-83
Add
pc(s)
|
D-436-84 | -55 | 155 | 16 |
D-436-84
Add
pc(s)
|
D-436-85 | -55 | 155 | 20 |
D-436-85
Add
pc(s)
|
D-436-86 | -55 | 155 | 20 |
D-436-86
Add
pc(s)
|
D-436-87 | -55 | 155 | 16 |
D-436-87
Add
pc(s)
|
D-436-88 | -55 | 155 | 26 |
D-436-88
Add
pc(s)
|
D-436-89 | -55 | 155 | 20 |
D-436-89
Add
pc(s)
|
D-436-90 | -55 | 155 | 16 |
D-436-90
Add
pc(s)
|
More products from the category: Wire to Wire Splicing
SGRT
SolderGrip terminals and disconnects utilise a spiral copper coil that grips and compresses the conductors and allows a pre-fluxed solder ring to flow to the centre of the splicing area, resulting in a highly reliable, repeatable joint.
B-202
SolderShield cable splices meet the growing performance requirements for shielded cable system fabrication and maintenance while minimising electromagnetic interference (EMI). Being one piece products consisting of a flux coated, solder impregnated copper hield braid encased in a heat shrinkable insulation sleeve, with crimp wire connectors. Conductor splices are made using MiniSeal crimp products which are recognised by MILS-81824 and MIL-W-5088.
B-070
These Feed-thru devices are designed to provide a high reliability water-resistant connection for a shielded or coaxial cable passing through a bulkhead or into equipment, when used with Thermofit boot and adhesive
1 pc/m