Mechanical protection, sealing and tensile strain relief of cable-to-connector. This type of shaped part is used especially where there is a big difference between the size of the connector (adapter) and the cable. On the connector side, there is a shoulder which, when shrunk, fits into the recess on the connector of the heat-shrinkable molded parts. This finish provides better strain relief for the cable.
|Name / part number||--||material||adhesive||Add|
|203W112-25/225-0||elastomer – chemically resistant||1||
|203W112-3-0||polyolefin – semi-flexible||0||
|203W301-25-0||elastomer – chemically resistant||0||
|203W301-25-G02-0||elastomer – chemically resistant||0||
|203W301-25-G03||elastomer – chemically resistant||0||
|203W601-25-0||elastomer – chemically resistant||0||
More products from the category: Boots
Mechanical protection and strain relief. As the part does not have a lip it can be installed directly onto the connector accessory thread.
Mechanical protection and cable connector strain relief. Ideal for applications where only a small number of contacts are utilised, resulting in the need for a high ratio boot to match the connector to cable diameter
Mechanical protection and strain relief. Part includes a lip or lips as required, can be installed onto circular adaptors of the appropriate shell size.